Clorox Clorox Plus Tilex Mold & Mildew Remover with Bleach Trigger Spray

Ingredients

Active Ingredient: Sodium Hypochlorite 2.4%. Other Ingredients: 97.6%. Total: 100.0%.

Warnings

First Aid: If in Eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. If on Skin or Clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. If Inhaled: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. In All Cases: Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment.Keep out of reach of children. Warning: See back panel for first aid statements. Precautionary Statements: Hazards to humans and domestic animals. Warning: Causes substantial but temporary eye injury. Do not get in eyes or on clothing. Wear safety glasses. Avoid contact with skin. Harmful if inhaled. Avoid breathing spray mist. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse. For sensitive skin or prolonged use, water rubber gloves. Not recommended for use by persons with heart conditions or chronic respiratory problems such as asthma, emphysema or obstructive lung disease. Physical and Chemical Hazards: This product contains bleach. Do not use or mix this product with other household chemicals, such as products containing ammonia, toilet bowl cleaners, rust removers, vinegar or acid. To do so will release hazardous gases.

Details

Kills 99.9% of mold & mildew. Contains bleach. Works on: Glazed and unglazed ceramic tile, grout, tubs, shower doors, vinyl curtains. Fiberglass, counters, sinks, plastic. Spray every drop! Whitens brilliantly. Contains no phosphorus. Smart tube technology. Questions or comments? Visit www.clorox.com or call toll-free, (800) 227-1860. For more product ingredient information, visit www.smartlabel.org. For Spanish translation of product information, visit www.clorox.com.

• MOLD REMOVER: One 32 fl. oz. spray bottle of Clorox Plus Tilex Mold and Mildew Remover that harnesses the power of Clorox bleach to kill mold and mildew
• KILLS MOLD AND MILDEW: Eliminates 99.9% of mold and mildew on a variety of surfaces throughout your home
• ELIMINATES STAINS: Tackles unsightly mold and mildew stains on hard, nonporous surfaces; suitable for use indoors and outdoors
• MULTI-SURFACE CLEANER: Use this cleaning spray for shower walls, sinks, counters and more; it's also a great tub and tile cleaner; avoid prolonged contact with metal and old porcelain
• OUTDOOR USE: Use this mold cleaner outside on surfaces like cement pools, glazed pool tile, and outdoor vinyl or plastic patio furniture to enhance the look of your outdoor spaces
• CLEANS WITHOUT SCRUBBING: Clorox Plus Tilex Mold and Mildew Remover tackles mold and mildew with ease, eliminating tough stains with no scrubbing required​

Eliminate mold and mildew with Clorox Plus Tilex Mold and Mildew Remover. Powered with Clorox bleach, this cleaning spray not only removes unsightly mildew stains, but it also kills 99.9% of mold and mildew. A powerful multi-surface cleaner and mold remover, Clorox Plus Tilex Mold and Mildew Remover is a great addition to your bathroom cleaners. This mold cleaner tackles stains and odors on hard, nonporous surfaces, like glazed tile, tubs, shower doors, counters, sinks and more. Not for use only inside the house, this cleaner can also be used on cement pools, glazed pool tile, and outdoor vinyl or plastic patio furniture. To kill mold and mildew on hard, nonporous surfaces, simply spray the surface, wait five minutes, and rinse clean. No scrubbing is required. Mold and mildew are no match for Clorox Plus Tilex Mold and Mildew Remover.

Directions

Directions for Use: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Avoid prolonged breathing of vapor. Use in well-ventilated areas. Open windows and turn on fans before use. If the vapors bother you, leave the room while this product is working. To Disinfect & Kill Mold & Mildew on Hard, Nonporous Surfaces: Turn nozzle to on. Spray surface until thoroughly wet, let stand 5 minutes and rinse. This product kills Salmonella enterica, Staphylococcus aureus, Streptococcus pyogenes, Trichophyton interdigitale (Athlete's foot fungus) and Aspergillus niger. To Remove Mildew Stains: Spray 6-8 inches from surface until surface is thoroughly covered. Allow foam to deeply penetrate mildew and problem areas. Wipe with a wet sponge or cloth, and rinse. Heavy mildew buildup may require longer contact time or two cleanings. To Kill Mold & Mildew on Hard, Porous Surfaces Such as Grout and Cement: Spray surface until thoroughly wet, let stand 10 minutes and rinse. Rinse immediately after use on rubber, plastic and vinyl. Avoid prolonged contact with metal and old porcelain as this product can react with these materials and leave a rusty stain. To Spray Every Drop: Tilt bottle at a downward angle while spraying. To Refill: Turn trigger on spray bottle counterclockwise and pull upward to remove. After refilling spray bottle, replace trigger by aligning red tube on trigger with small opening inside bottle and push firmly down. Storage and Disposal: Store this product in a cool area to avoid deterioration. Do not reuse or refill except as described in the directions for use. Refill only with this product. Recycle empty container or discard in trash. Align to close.

Country of Origin

Made In Global Components.,Made In USA Global Components.,Made In USA Of Global Components.,USA

Manufacturer

The Clorox Company

Product Disclaimer:

Hannaford is committed to providing accurate nutritional information to its customers. As an important part of that effort we voluntarily provide such material on our website. We rely upon our suppliers to provide us with this information on an ongoing basis and to advise us immediately whenever any new claims or adjustments to declared values are made, so that we can properly maintain the accuracy of this online resource. We have, however, experienced occasional situations in the past where, due to the lack of such notice or for some other reason, minor discrepancies in this area have occurred. We therefore strongly encourage our customers to read the labels of any of the products that they purchase in order to make certain that they are compatible with their own nutritional preferences and expectations. If you receive a product from Hannaford, and the nutritional information on the product label does not match the information on our site, please contact Hannaford customer service and we will arrange for a credit to issue for the product at issue.