Pine-Sol Pine-Sol Multi-Surface Original Cleaner

Ingredients

Active Ingredient: Citric Acid (1.75%). Other Ingredients (98.25%), Total: 100.00%.

Warnings

First Aid: If in Eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Have the product container or label available when calling a poison control center or doctor, or when going for treatment.Keep out of reach of children. Warning: See panel for additional precautionary and first aid statements. Precautionary Statements: Hazards to humans and domestic animals. Warning: Causes substantial but temporary eye injury. Do not get in eyes or clothing. Wear appropriate protective eyewear such as safety glasses. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove and wash contaminated clothing before reuse. The state of California has determined that this product may cause allergic reactions in some individuals if exposed for prolonged periods of time or frequently repeated skin contact. Physical or Chemical Hazards: Do not use or mix with bleach-containing products or other household cleaners.

Details

Cleans, deodorizes & disinfects (b). Kills 99.9% of germs (a). Multi-surface cleaner. 2x concentrated formula*. Cleans, deodorizes & disinfects in one step (b). Removes tough dirt, grease & grime. Kills 99.9% of viruses (c) & bacteria. Deodorizes & leaves a fresh scent. Cleans tough pet messes. Great for use in the kitchen, bathroom, counters and on floors. * vs. unconcentrated Pine-Sol Multi-Surface Cleaner. (a)Salmonella enterica, Staphylococcus aureus, Influenza A Virus and SARS-CoV-2 (cause of COVID-19). (b)Use as directed on hard, nonporous surfaces. (c)Influenza A (H1N1) Virus, Respiratory Syncytial Virus (RSV), Human Coronavirus. For more product ingredient information, visit www.smartlabel.org. Questions or comments? Please visit www.pine-sol.com or call 1-800-227-1860.

• ONE BOTTLE DOES IT ALL: Use Pine-Sol to clean countertops, sinks, garbage disposals, floors, sealed wood surfaces, furniture, walls, doorknobs, showers, tubs, toilets and more; packaging may vary
• 5X CLEANING ACTION: Pine-Sol Multi-Surface Cleaner, Original, works hard so you don’t have to; it deodorizes, cuts through grease, removes grime, tackles tough dirt and removes 99% of allergens (1)
• KILLS 99.9% OF GERMS (2): Fight germs with Pine-Sol Multi-Surface Cleaner, Original, that disinfects both full strength and diluted when used as directed on hard non porous surfaces
• MULTI-SURFACE CLEANER: Pine-Sol Multi-Surface Cleaner, Original, is suitable for use on a variety of surfaces like finished wood, tile, stone, porcelain and more
• 2X CONCENTRATED FORMULA (3): Pine-Sol Multi-Surface Cleaner, Original, has a 2X concentrated formula (1) that lasts 2X longer (4) and disinfects full strength or diluted

With Pine-Sol Multi-Surface Cleaner, Original, you only need one cleaner to fight tough dirt, grease and grime. Pine-Sol gives you 5X cleaning action as it deodorizes, cuts through grease, removes grime, tackles dirt and removes 99% of allergens (1), all while leaving a classic pine scent. EPA registered to kill 99% of germs (2), this 2X concentrated formula (3) lasts 2X longer (4) than the unconcentrated Pine-Sol formula. One bottle does it all. Pine-Sol is suitable for use on sealed wood, tile, stone, porcelain, glass and more when used as directed. Do not use on marble, aluminum, copper or wood that is unfinished, unsealed, unpainted, waxed, oiled or worn. (1) Non living dust mite matter and pet dander. (2) Salmonella enterica, Staphylococcus aureus, Influenza A virus and SARS-CoV-2 (Cause of COVID-19) when used as directed, on hard non porous surfaces. (3) Vs. unconcentrated Pine-Sol Multi-Surface Cleaner. (4) When diluted vs. unconcentrated Pine-Sol Multi-Surface Cleaner.

Directions

Directions for Use: It is a violation of federal law to use this product in a manner inconsistent with its labeling. To Clean & Deodorize: Mix 1/8 cup per gallon of water. Mop, wipe or spray with solution. For tough jobs, use full strength and rinse immediately. To Disinfect: Use full strength or mix 1 cup per 1/2 gallon of water and apply on hard, nonporous surfaces with a clean sponge or cloth. Allow surface to remain visibly wet for 10 minutes, then rinse. For visibly soiled surfaces, preclean surfaces before disinfecting. To ensure stability, prepare solutions daily. For painted surfaces, test a small area first. Do not use on marble, aluminum, copper or wood that is unfinished, unsealed, unpainted, waxed, oiled or worn. Storage and Disposal: Store in a cool, dry area. Nonrefillable container. Do not reuse or refill this container. Offer for recycling, if available, or place in trash collection.

Country of Origin

Made In USA Of Global Components.

Manufacturer

The Clorox Company

Product Disclaimer:

Hannaford is committed to providing accurate nutritional information to its customers. As an important part of that effort we voluntarily provide such material on our website. We rely upon our suppliers to provide us with this information on an ongoing basis and to advise us immediately whenever any new claims or adjustments to declared values are made, so that we can properly maintain the accuracy of this online resource. We have, however, experienced occasional situations in the past where, due to the lack of such notice or for some other reason, minor discrepancies in this area have occurred. We therefore strongly encourage our customers to read the labels of any of the products that they purchase in order to make certain that they are compatible with their own nutritional preferences and expectations. If you receive a product from Hannaford, and the nutritional information on the product label does not match the information on our site, please contact Hannaford customer service and we will arrange for a credit to issue for the product at issue.